KINETIXX® Velocity Long Driver 48″ Series (Incl PURE®ing)

$325.00

The Shaft Used By the 2019 Long Drive Champion Kyle Berkshire

LD 70, LD 60+, LD 50, LD 30+, LD 20, Mid-High Balance point, High kick point advanced composite table rolled construction that kicks hard and recovers fast in a tailored sequence from butt to high tip. Producing increased ball velocity and a Medium height piercing shot trajectory.

See Complete Descriptions, Spec. Below

Shaft Model: No selection

Shaft Flex: No selection

Shaft Color: No selection

Clear

Select PURE®ing Click Check Mark to See Selections

Click Box to Purchase One Single Wood or Iron Shaft PURE®ing ($35.00)

Click Box To Include PURE®ing

*Single Wood Shaft must be over $250 Or $100 Iron Shaft to qualify for PURE®ing being Included.

Special Instructions Click Check Mark to See Selections

PURE®ing Instructions or Special Comments

Please let us know right-hand or left-hand for the shaft PURE®ing and any other special instructions.

Shaft Prepping Click Check Mark to See Selections

Tip Trim and Prep per shaft ($2.95)

Extra Charge for .370 Graphite to .355 Taper ($5.00)

Center Grind .370 Graphite to .355 Taper Tip

Add-ons total:

Total:

Please allow an extra 2-3 days for processing orders with Shafts.

Description

Long Drive Series 48″

Featuring Dual-flex reactive technology, in the world only pre-loaded, and vacuum-cured Nano-Carbon amorphous fiber material shaft construction, table rolled laminate composite. Vacuum Cured to minimize resin content, optimizing elastic strength and dynamic recovery properties of the Nano-Carbon Amorphous material. Enhancing feedback and delivering an extremely forgiving shaft. Active butt and tip quadrants are tailored for high-speed long-drive athletes desiring to improve efficiency and increase ball velocity through the purest kinetic energy transfer from the golfer to the club.KVMT70-BGBLD is a Mid-High Balance point, High kick point advanced composite table rolled construction, that kicks hard and recovers fast, in tailored sequence from butt to high tip. Producing increased ball velocity and a Medium height piercing shot trajectory.

Flex Code	Torque ±0.5°	Tip dia. ±0.002” (±0.05mm)	Tip/par ±0.5″	Butt dia. ±0.005” (±0.12mm)	Butt par. ±0.5″	Length	Weight ±2g	Frequency ±5cpm	Balance point	Kick point	Materials
Flex Code	Torque ±0.5°	Tip dia. ±0.002” (±0.05mm)	Tip/par ±0.5″	Butt dia. ±0.005” (±0.12mm)	Butt par. ±0.5″	Length	Weight ±2g	(205g Tip weight)	Balance point	Kick point	Materials
LD70	4.5°	.335” (8.50mm)	4.00″	.638” (16.20mm)	9.50”	48.00”	72g	295cpm	55.00%	High	Amorphous, 40T, 30T,5T
LD60+	4.5°	.335” (8.50mm)	4.00″	.638” (16.20mm)	9.50”	48.00”	71g	275cpm	54.00%	High	Amorphous, 40T, 30T,5T
LD50	5.5°	.335” (8.50mm)	4.00″	.630” (16.00mm)	9.50”	48.00”	66g	265cpm	53.00%	High	Amorphous, 30T, 5T
LD30+	5.7°	.335” (8.50mm)	4.00″	.622” (15.80mm)	9.50”	48.00”	61g	245cpm	52.00%	High	Amorphous, 30T, 5T
LD20	5.9°	.335” (8.50mm)	4.00″	.618” (15.70mm)	9.50”	48.00”	58g	225cpm	51.00%	High	Amorphous, 30T, 5T

CPM Parameters:

Shaft type	Tip weight	Clamp length	Clamp pressure
Long Drive	205g	4.50”	4kg cm²

All PADERSON KINETIXx loaded shafts are to be BUTT Cut to length only.
Do not TIP trim any shaft model! Regardless of CPM, or club assembly config.
Please do not Chamfer the tips; however, light belt abrasion is recommended .*Tip preparation: light belt abrasion or hand sanding is recommended prior to final assembly.*To ensure a smooth and clean build, we perform a post-production tip preparation: 1″ Metalwoods, 1.25″ Irons. depending on hosel bore depth, there will, in many assemblies, be the need to lightly sand beyond the prepared surface delivered. Light belt abrasion is also recommended to ensure a full shaft insert and adequate epoxy adhesion. Do not use the Chamfer tip section or blade prep (scratch) tip to prepare for epoxy.

Additional Info

Weight: lbs

Shaft Model: LD 70 | LD 60+ | LD 50 | LD 30+ | LD 20
Shaft Flex: LD20 R Flex | LD30 S Flex | LD30+ SS Flex | LD50 2X Flex | LD60 3X Flex | LD60+3X Tour Flex | LD70 4X Tour Flex
Shaft Color: Black/Pink | Black/Red | Electric Blue/Red | Green | Midnight Gold | Sky Blue/Red

Specifications

Brand

Kinetixx Shafts

KINETIXX® loaded shaft technologies are the worlds most advanced array of demonstrably unique, visibly tailored, precision crafted, swing interactive golf shaft technologies to enter the market. PADERSON® KINETIXX® loaded shafts, are the genuine confluence of materials and craftsmanship.