We at Billy Bob’s have seen many different Club Fitting Systems, some good and some not so good. As a result, we came up with a system that will give you the closest specifications to a Regular, Permanently Epoxied Shaft. The reason this works is that the shaft goes down through to the bottom of the hosel sleeve and the shaft is attached to the sleeve with our Patent Pending CMX® Threaded Top Ferrule System. (This will come with a complete set of instructions). We start out with our Billy Bob’s CMX Aftermarket Adjustable Sleeves that fit TaylorMade R1, R15, M1, M2, M3, M4,M5, M6 & ADAMS XTD Ti with 2 Degrees Offset Total 4 Degrees Adjustment
Next, we manufactured a CMX® Threaded Metal Ferrule that is epoxied to the tip end of the shaft that fits within the sleeve. Now, you can have unlimited shaft combinations . This creates a huge advantage in club fitting, all while being extremely cost effective. We will offer these CMX® Sleeve Bodies and the CMX® Threaded Metal Ferrule that can be purchased Separately based on the fitter’s needs. This is for the CMX® TaylorMade R1, R15, M1, M2, M3, M4,M5, M6 & ADAMS XTD Ti with 2 Degrees Offset Total 4 Degrees Adjustment.
Top Ferrule sleeve sold Separately. Click to Add Top Sleeve
Available RH, LH
View Installation Instructions